Table of Contents
Advertisement
ENG
Installation Of Inner Duct Mounting Bracket
2 fixing holes are drilled on the wall with Ø 6 mm electric drill at a suitable height and place to fix the inner duct
hanger plate onto the wall. 6mm drywall anchors are nailed into those holes and inner duct mounting brackrets are
pinned down.At the last step of chimney hood installation, the inner duct is screwed on the inner duct mounting
brackets.
MOUNTING THE CHIMNEY HOOD ON THE WALL
Lift the chimney hood body and fix the hanger plates onto the wall anchors as shown in Figure 3.
Leveling The Chimney Hood
If the chimney hood is inclined on one side, the chimney hood can be leveled with the adjustment screws as
shown in Figure 4. Once the balancing is complete, the screws shown in Figure 5 must be fixed tightly. After this,
fix the body with one screw through the hole on the body.
Mounting The Aluminum Pipe
Place the aluminum pipe on the plastic duct. Place the other end of the pipe into the air outlet in the kitchen.
(Figure 6)
Figure 5
Figure 3
Figure 4
Figure 6
6
Advertisement
Table of Contents
