Asus P4B-M User Manual page 40

4. LAN setting (3-pin LAN_EN) (on LAN models only)
This jumper allows you to enable or disable the onboard Local Area
Network (LAN) feature. The default setting is on pins 2-3 (Enabled).
®
P4B-M On Board Lan Setting
Figure 2-26
5. Bass Center setting (3-pin BCS1, BCS2)
This jumper allows you to select the speaker output for a 6-channel
audio system. No audio standard exists for the three pick-up surfaces
on male audio ports, so it is necessary to switch the jumpers from the
default position Center/Bass (pins 2-3) to Bass/Center (pins 1-2) to re-
route signals on the internal leads of the Line-In, Line-Out, and Mic
ports.
Use the audio driver included in the support CD to install the multi-
channel audio feature.
®
P4B-M Bass Center Setting
Figure 2-27
2-20
P4B-M
LAN Settings
P4B-M
Bass Center Settings
LAN_EN
1 2 2 3
Disabled Enabled
(Default)
BCS
BCS1
BCS2
1 2
(BASS/CENTER)
Chapter 2: Hardware information
BCS1
BCS2
2 3
(CENTER/BASS)
(Default)