3.3
Troubleshooting (FAQ)
Problem
Power LED is not ON
The power LED lights amber and there is no
screen image
Screen image is too light or dark
Screen image bounces or a wave pattern is
present in the image
Screen image has color defects (white does
not look white)
3D function is not well working
3-5
Possible Solution
• Press the
button to check if the monitor
is in the ON mode.
• Check if the power cord is properly
connected to the monitor and the power
outlet.
• Check if the monitor and the computer are
in the ON mode.
• Make sure the signal cable is properly
connected the monitor and the computer.
• Inspect the signal cable and make sure
none of the pins are bent.
• Connect the computer with another
available monitor to check if the computer
is properly working.
• Adjust the Contrast and Brightness
settings via OSD.
• Make sure the signal cable is properly
connected to the monitor and the
computer.
• Move electrical devices that may cause
electrical interference.
• Inspect the signal cable and make sure
that none of the pins are bent.
• Perform Reset via OSD.
• Adjust the R/G/B color settings or select
the Color Temperature via OSD.
• Make sure the bundled dual-link DVI cable
is properly connected to the monitor and a
compatible NVIDIA-GPU graphics card.
• Make sure the NVIDIA® 3D glasses and
IR emitter are properly connected to the
computer via USB cables.
• Make sure the computer was installed with
Microsoft® Windows Vista or Windows 7
operating system, and required NVIDIA
3D drivers.
• Make sure screen resolution setting is
1920x1080 at 120Hz, 110Hz or 100Hz.
• Visit NVIDIA website (http://www.nvidia.
com/) for more information about system
requirements, setup instructions, and PC
games supported.
Chapter 3: General Instruction