Table of Contents
Advertisement
Setting the MCU and Pipe Addresses (for HR Only)
the Pipe Addresses Manually or Setting the Pipe Addresses Automatically. (Auto pipe pairing operation)
•
Pipe Addresses Manually.
CAUTION
-
•
install manual.
Setting the Pipe Addresses Manually
unit.
Setting by using the wired or wireless remote control (For how to operate the remote
control buttons, see the remote control user manual.)
(You can also set the address of each indoor unit.)
Value
Value
Value
Value
94
the indoor unit will
A: Address setting
mode
the indoor unit will
SEG8
digit of the indoor
unit address
set.
the MCU address
of the indoor unit
of the indoor unit
address
address
channel
address
A to F: MCU port
the MCU address
address
Advertisement
Table of Contents
