LAN Driver Setup
You will see a "Found New Hardware Wizard" if you device requires setup. If not your driver may already
be installed by Windows. If your device is not working, you can manually install the driver as follows:
1. On the "Ethernet Controller Properties"
screen, click Reinstall Driver.
3. Select "Install from..." and click Next.
5. Wait while fies are copied to your
system.
34
2. Select "No..." and click Next to install
the driver from the provided CD.
4. Click Browse to find the LAN driver.
(Path will vary by model and region.)
6. When complete, click Finish to exit the
installation wizard.
7. Click Close to exit the properties window.