Sony BCU-100 Maintenance Manual page 42

After execution, the following dialog appears. This is the file name in which to save the BE-28 board
bore removal. Write down the file name, and click "OK".
This data is required for "After Board Replacement" that will be executed after the BE-28 board is
replaced.
After Board Replacement
Execute this after the BE-28 board is replaced. The following items are executed.
. Restore FAN Hm (Restores the FAN Hours Meter data.)
. FAN Check (FAN rotation check)
. Main Device Check
. HDD Read Check
. USB Storage Check (Option * USB Memory is required.)
. Read Log (SYSCON error log read check)
After execution, the following dialog appears. Select the file name saved before replacing the BE-28
board by clicking "Yes" or "No".
Click "Yes" for the correct file, and click "No" for the wrong one. If you click "No", the other data
files are displayed in sequence. Continue clicking "No" until the correct file is displayed.
If the data file does not exist, execute "Before BE-28 Board Replacement" again. If you clicked "No"
by mistake, click "OK" when the following dialog is displayed, and execute this item again.
1-34 (E)
BCU-100 MM