Advertisement
Control panel
•HZY-8Z
•HZY-15Z
10
Initial power-on
Please observe the following rules when conducting initial start-up and continuous running:
Connect the power cord to the dedicated socket of proper specification when the cooler is empty.
This Transport cooler is preset to run at below 4 ±2℃ before factory delivery, so there is no need
to set up the temperature.If you need to adjust the temperature, please contact professionals for
operation.
The sound alarm will ring under overtemperature after power-on and this is normal.At this time,
press any key (press Function or Return key of cold chain module) and the buzzer alarm sound
will be cancelled.If the alarm condition is not relieved after the default 30 minutes, the sound
alarm will work again until the temperature sensor reaches the range of 2-10 ℃ .
The temperature can be stabilized within the set temperature range only after the Transport
cooler has been running for a period of time.
Start putting articles gradually into the transport cooler after completing a thorough inspection of
the Transport cooler.
7
Hide quick links:
Advertisement
