Safety Instructions; General; Installation; Overflow Guard Function - Asko W6222 Use And Care Manual

Safety instructions

General

• Read and keep the operating instructions!
• Installation of water and electricity, if
required, should be carried out by a quali-
fied professional.
• Damaged supply cord must only be re-
placed by a qualified professional.
• The machine should only be used for
washing items as described in these in-
structions - it is not intended for dry clean-
ing!
• Use only detergent intended for machine
washing!
• Remove any transport protection devices
before using the machine (see the "Trans-
port protection" chapter).
• Repairs and maintenance relating to
safety or performance must be carried out
by a qualified professional.

Installation

See the "Installation" chapter.

Overflow guard function

If the machine's water level rises above
the normal level, the overflow guard func-
tion begins to pump water out and shuts off
the water intake. If the water level has not
dropped within 60 seconds, the programme
is terminated.
4
Transport/ Winter storage
If the machine is to be transported or stored
in unheated premises where the tempera-
ture can fall below freezing, do as follows:
• Empty the filter and drainage pump (see
the "Care and cleaning" chapter).
• Shut off the water to the washing ma-
chine, loosen the supply hose to the
intake valve and let the water run out from
the valve and hose.

Disposal

When the machine has reached the end of
its service life and is to be disposed of, it
should immediately be made unusable.
Contact your local authority for information
about where your machine should be dis-
posed of and recycled in the proper way.
The machine is manufactured and labelled
for recycling.