Settings; Reprogramming; Child-Safe Button Lock - Asko D3250 Use And Care Manual

Settings

Reprogramming

Some of the machine's functions can be reprogrammed. Please reade below. The selection
will be retained until the next time you reset this function.
Even if the machine is turned off at the main switch or loses power for any other reason, all
selections registered before the interruption of power will be retained.

Child-safe button lock

You can prevent a child starting the machine by accident or changing the settings by pro-
gramming the machine with a button lock, which requires the Temperature and Drying
buttons to be pressed simultaneously to start up the machine. The button lock will
automatically be reactivated after three minutes.
1. Switch off the dishwasher with the main switch.
+ 2. Hold in the Temperature and Drying buttons while pressing the main
switch. The Temperature, Drying and start symbols will flash. Release the
Temperature and Drying buttons.
3. Press the Program button – when the Pots & pans symbol is lit,
PROG PROG
the button lock has been activated
START 4. Then press the Start/Stop button to store the setting.
STOP
or Reset:
1. Switch off the dishwasher with the main switch.
+ 2. Hold in the Temperature and Drying buttons at the same time as pressing
the main switch
PROG PROG
3. Press the Program button – when the Pots & pans symbol goes out,
the button lock has been deactivated
START
4. Then press the Start/Stop button to confirm the setting.
STOP
22