Art T8 Specifications

T8
8 Channel Transformer/Isolator

Specifications

Frequency Response:
THD:
Channel Separation
CMRR:
Phase Error:
Insertion Loss:
Input Connections:
Output Connection:
Dimensions:
Weight:
Power Requirements:
T8 Applications:
Live Sound, Permanent/Fixed Install, D.J., and virtually any PA or AV application
Celebrating Twenty Years of Audio.
Applied Research & Technology • 215 Tremont St., Rochester, NY 14608 • USA • 585.436.2720 tel • 585.436.3942 fax • www.artproaudio.com
10Hz –50kHz, +/-.5dB
@ +4dBu
.01% Typical @ 1kHz,+18dBu,
<.1% @ 100Hz, +24dBu
90dB typical
60dB typical
less than 5°, 20Hz – 20kHz
.4dB @ 100k Ohm Load,
5.5dB @ 600 Ohm Load
XLR female balanced, 1/4"
TRS balanced, and RCA type
phono jacks
XLR male balanced, 1/4" TRS
balanced, and RCA type
phono jacks
1.75"H x 19"W x 3.75"D
(44.5mm x 482.6mm x 95mm)
3.75 lbs. (1.7kg)
Totally Passive
Features and specifications subject to change without notice. ©2005 Applied Research and Technology ART-T8-Specs-1204
Reversable
Mounting
T8 Features:
High-quality, passive audio
interface
8 high performance transformers
XLR,1/4" phone, and RCA type
phono connections on all inputs
and outputs.
Reversible rack mount ears
Separate input and output signal
grounds reduce hum
Audio transformers have an
extremely flat and wide
frequency response
Very clean and neutral sound with
a wide variety of signal sources
Can be used for signal taps or as
a signal splitter
Use as a safer connection between
two audio systems (ie: Computer
workstation or monitor system)
19" 1U black all steel case
Ears!