7
Technical specifications
7.1
General technical data
The general technical specifications apply to all analyzer versions unless they are not defined otherwise in the technical
specifications of the analyzer versions.
The technical specifications listed in this document are an excerpt that includes all safety-related data. The complete
technical specifications can be found in the respective operating instructions of your analyzer.
Enclosure
Position of use of the analyzer
Degree of protection
Electrical characteristics
EMC interference immunity
(with safety extra-low voltage (SELV) with
safe isolation)
Electrical safety
Power supply
ULTRAMAT 23
•
All other analyzers:
•
Climatic conditions
Permissible ambient temperature
During operation
•
–
CALOMAT 6E, article no. 7MB252x-
xGAxx
–
All other analyzers:
During transportation and storage
•
Vibrations
During operation
•
During transportation and storage
•
Permissible ambient pressure
Note
The information on the technical specifications is based on DIN EN 61207/IEC 61207.
26
Front panel vertical
IP20 according to EN 60529
In accordance with standard requirements of NAMUR NE21 or EN 61236
According to EN 61010-1,
overvoltage category III
120 V AC, +10%/-15%, 50/60 Hz or
200 V AC, +10%/-15%, 50 Hz or
230 V AC, +10%/-15%, 50/60 Hz or
100 V AC, +10%/-15%, 60 Hz
100 V AC to 120 V AC, 50/60 Hz or
200 V AC to 240 V AC, 50/60 Hz
+5 to +55 °C
+5 to +45 °C
-30 to +70 °C
None
Maximum vibration 5 m/s
700 to 1200 hPa absolute
Compact Operating Instructions in accordance with EN 61010-1 and EN 60079-0
2
A5E45779144002-01, 09/2018