1050 Hard Disk Drive - Lenovo V14 Hardware Maintainence Manual

Lenovo V14 and V15 Hardware Maintenance Manual

1050 Hard disk drive

•
•
For access, remove the FRU in following order:
"1010 Base cover" on page 41
"1020 Battery pack" on page 43
Attention:
• Do not drop the hard disk drive or apply any physical shock to it. The hard
disk drive is sensitive to physical shock. Improper handling can cause damage and
permanent loss of data.
• Before removing the drive, suggest the customer to backup all the information on
it if possible.
• Never remove the drive while the system is operating or in suspend mode.
Step 1: Remove the screws 1.
Step 2: Pull the hard disk drive in the direction shown by arrow 2.
1
Figure 12. Remove the screws and the hard disk
Step Screw (quantity)
M2 × 6 mm, Phillips-head, nylok-coated (2)
1
1
2
Color Torque
Black 1.85+/-0.15 kgf/
cm
47