Download
Share
Print this page
  1. Manuals
  2. Brands
  3. NCR Manuals
  4. Antenna
  5. Port C
  6. Kit instructions

NCR Port C Kit Instructions

Wireless card and antenna
Hide thumbs

Advertisement

Quick Links

Download this manual
Kit Instructions
Wireless Card and Antenna (Port C)
7772-K168
Issue A

Advertisement

loading

Related Manuals for NCR Port C

Summary of Contents for NCR Port C

  • Page 1 Kit Instructions Wireless Card and Antenna (Port C) 7772-K168 Issue A...

  • Page 2: Revision Record

    NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current.

  • Page 3: Kit Contents

    Wireless Card and Antenna (Port C) This kit provides a Wireless Card and Antenna for Port C of the NCR CX7 All-in-One POS (7772) or NCR CX5 All-in-One POS (7773). Kit Contents...

  • Page 4: Installation Procedure

    Wireless Card and Antenna (Port C) Installation Procedure 1. Lay the Display face down on a flat surface. Note: Always use a soft material (cloth, foam) to protect the display screen when placing the terminal face down. 2. Remove the Cable Cover.
  • Page 5 Wireless Card and Antenna (Port C) 3. Disconnect the Cables. a. Loosen the thumbscrew of the 180-degree USB-C Cable then disconnect the Cable. b. Remove the Ethernet Cable from the Cable Management Hook then disconnect the Cable. 4. Loosen the two (2) captive screws that secure the Back Cover to the Display.
  • Page 6 Wireless Card and Antenna (Port C) 5. Rotate the Back Cover away from the Display and unhook the Back Cover Tabs.
  • Page 7 Wireless Card and Antenna (Port C) 6. Insert a flat screw driver in the slot to unsnap the Peripheral Filler Plate from Port C of the display housing. 7. Insert the Wireless Card into the connector.
  • Page 8 Wireless Card and Antenna (Port C) 8. Secure the Card with a screw. 9. Route the first Antenna Cable through the port opening located as shown and pull the Cable completely through. Note: If present, remove the protective cover from the Micro Coax Connector.
  • Page 9 Wireless Card and Antenna (Port C) 10. Remove the adhesive liner from the Antenna and place the Antenna on the location marked “1” on the display housing. Ensure the solder joint of the Antenna is within the opening. 11. Route and secure the Antenna Cable under the Cable Management Hooks as shown.
  • Page 10 Wireless Card and Antenna (Port C) 12. Connect the first Antenna Cable to Connector 1 (Aux) of the Wireless Card. 13. Route the second Antenna Cable through the port opening located as shown and pull the Cable completely through. Note: If present, remove the protective cover from the Micro Coax Connector.
  • Page 11 Wireless Card and Antenna (Port C) 14. Remove the adhesive liner from the Antenna and place the Antenna on the location marked “2” on the display housing. Ensure the solder joint of the Antenna is within the opening. 15. Route and secure the Antenna Cable under the Cable Management Hooks as shown.
  • Page 12 Wireless Card and Antenna (Port C) 16. Connect the second Antenna Cable to Connector 2 (Main) of the Wireless Card. Note: For clarity, the first Atenna Cable is not shown in the illustration. 17. Hook the Peripheral Filler Plate into the display housing and snap into place.