Table of Contents
Advertisement
8. The "Destination Hard Disk" screen will appear. Select the appropriate
destination hard disk. The destination hard disk is typically your new
hard disk drive. Click Next to Continue.
9. The "Non-empty Destination Hard Disk" screen will appear when you
have selected to transfer data to a drive that already contains data.
If you need to confirm that you have selected the proper source
and destination drives, click the Back button to check. If you have
chosen the proper source and destination drives, then select the "Delete
partitions on the destination hard disk" button. Click Next to continue.
Value You Can Depend On
1
Advertisement
Table of Contents
