D Esktop - Apricorn ADT 500GB User Manual

3. CONNECTING YOUR Aegis Desktop
You have two choices for setting up your Aegis Desktop. You may use either the
eSATA to eSATA cable or the USB cable provided:
For use with the eSATA cable on a system with a pre-installed eSATA card:
1. Start by turning off your computer.
3. Connect the eSATA cable to the eSATA port at the rear of the Aegis Desktop
and the other end to an available port on your pre-installed eSATA card
4. Connect the AC adapter at the rear of the Aegis Desktop and then plug
into an available wall outlet or power strip.
5. Turn the Aegis Disktop ON using the ON/OFF switch located on the rear
panel. The indicator light will come on to let you know that the Aegis Desktop
is powered.
6. Now, power up your computer.
For use with the USB cable:
1. Connect the USB cable to the USB port at the rear panel of the Aegis
Desktop and to an available USB Port on your computer.
2. Connect the AC adapter at the rear panel of the Aegis Desktop and then
plug into an available wall outlet or power strip.
3. Turn the Aegis Disktop ON using the ON/OFF switch located on the rear
panel. The indicator light will come on to let you know that the Aegis Desktop
is powered.
www.apricorn.com 9