KLIK Boks Quick Start Manual

4
Add KLIK to A Wireless Network
7) The KLIK Boks will restart and display that it is in now connected to the Wi-Fi
network shown. Users are directed to connect to the same wireless network in
order to stream content to the KLIK.
5
Launch KLIK Software and Start Streaming
1) Locate the program icon and start the software.
2) When the Connection Manager appears, select the KLIK Boks by name,
enter the displayed Password and press Connect.
NOTE: If the KLIK Boks name does not appear in the Connection Manager,
check that Network Discovery is enabled. Alternately, enter the IP Address
displayed on the KLIK Standby Screen to connect.
3) Once connected you will see the KLIK Player. To mirror your screen simply
press Play!
NOTE: For more setup and operating information refer to the User Manual
Page 4
KLIK Boks Quick Start Guide
Default Settings Password:
Default Administration Password:
Default Wi-Fi Mode IP Address:
NOTE: Steps 1 - 4 are one-time setup. Step 5 is for Users.
1
Connect KLIK Boks to Display
1) Use either VGA or HDMI to connect the KLIK Boks to your display or projector.
SPDIF L R HDMI VGA
DC5V/1A
2
Add KLIK to a Wired Network
Use an Ethernet Cable to connect to your existing router
NOTE: To connect with Wi-Fi follow the instructions in
VGA LAN
the Section 4, "Add KLIK to a Wireless Network".
3
Install KLIK Software
Download & Install from www.klikboks.com or the App Store for your device.
NOTE: KLIK may also be used without software installation. Windows, Mac, iOS and
Android users can connect using their native streaming utilities.
Copyright 2018 KLIK Communications Inc. - All Rights Reserved www.klikboks.com - Document QSG8.1.0
admin
adminpwd
192.168.59.254
NOTE: Only one video
LAN
output will be active at a
time. Use either HDMI or
VGA but not both.
2) Connect Power Supply and press
Power button once to turn On.
Page 1