Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc.
1. Introduction The product can switch any of these 4 HDMI 2.0 sources to an HDMI 2.0 display. It supports 10bits HDR (High Dynamic Range) pass through and resolution up to 4K2K@50/60Hz 4:4:4. An optical output is supported. The product is built-in WiFi function, so it supports voice control through connecting an amazon voice product and APP control.
Number Name Function description The LED will illuminate in red when the device is POWER LED connected to power supply. The LED will illuminate in green when HDMI OUT IN 1/2/3/4 LED port is selected an input source. Network connection LED. The LED will illuminate LINK when the device connects network signal.
5.3 Side Panel HDMI OUT Number Name Function description Connect to one HDMI display device such as TV HDMI OUTPUT or Monitor with an HDMI cable. Connect to audio output device such as amplifier OPTICAL port with an optical wire. 6.
Page 7
You need to fill in some information to creat an account. You can enter the login page when the account creates successfully. The page is show as below: Sign in the account successfully, you will enter the following page. You need to setup a new device on the “Settings”...
Page 8
At this time, according to your speaker box to select one product. Our company uses the product about “Echo Dot”, and clicking the “Echo Dot” icon will setup the product at the following steps. At this step, you need to power on your Echo Dot. When the blue horse race lamp is off, you need to press the ‘round dot’...
Page 9
At this step, go to your Wi-Fi setting on this computer and select the network of the format ‘Amazon-XXX’ to connect it. After connecting to ‘Amazon-XXX’, you can continue setup. These page are show as below: At this step, you need to select one available Wi-Fi network on this computer and connect it.
Page 10
At this step, the Echo Dot is connected to the Internet. Click the ‘Continue’ button. The page is show as below: You can connect an external speaker to your Echo Dot. Our company does not an externel speaker to connect the Echo Dot, so I will select ‘Use built-in Echo speaker’.
6.2 To set Switcher and use APP control Please download a “Smart switcher” APP on your iOS device. Smart switcher Click this APP icon, if you registered before, click “SIGN IN” to login, but if you have not register, please click “Registered”. Then you will see the following register page.
Page 12
Cloud account registration and binding Current devices Enter your email Enter the password Step2: Please enter the email and Step 3: Click the password before you “+” sign have registered, and then click the “Sign in” to login. Sign in Forget password Registered Please set up network connection...
Page 13
Step6: When you see this page, the Wifi has connected success, click “OK” button and then click “Set” button to enter the following [isSuc: YES, isCancelled: page. At this time, the LINK LED is always NO,bssid: dc4f224f6acb,inetAddress: light. 192.168.137.220] Name Sink Name Output Source Name...
Page 14
① ② ③ ④ ① Green means connected success. ② Gray means unconnected success, refresh this page and wait for a moment. If it still is unsuccess, please connect it again from Step 3. ③ Black means the product can be controlled by voice box.
6.3 To activate Skills and connect product At the Amazon Alexa page, You need to select “Skills” option and input “smart switcher” and click “search” button to enter the next step. 13 / 16...
I have registered the Email address and Password at the front and fill in it at this page. At this step, the smart switcher has been successfully linked. You can use the Echo Dot product to switch the switcher input source. 6.4 Echo voice command list Function Voice command...
6.5 Automatic switch features ① The product has power off memory function. After power off, and these input signal sources have not been pulled out. The output device will display the input source of the last power down when the product is powered on again. ②...
8. FAQ 1. Q: Does this product require an HDMI line length for the connection interface? A: According to HDMI line length test, HDMI input / output with 4K2K@24Hz 8bit or 4K2K@60Hz YCbCr 4:4:4 is the longest line length up to 16.4ft / 5m. The use of “Premium High Speed HDMI”...