Advertisement
SDP-900DX
B A S I C
The Samsung SDP-900DX provides control of the basic operations on the front panel of the Digital Presenter. Please note that you
can also access these features via the Remote Control or the PS/2 Mouse by right-clicking on the mouse button to access the menu.
Advanced features are found on both the remote and menu commands via the mouse.
Use the Freeze button to "hold" any
image on screen while you change your
automatic color adjustment at any time.
subject or to Freeze an object in any
Tip
position.
ter on the display surface to affect white
Tip
: The Freeze button is used to freeze
balance. Printed text on white paper is OK.
a live image or divided image in order to
activate the Draw menu command for
annotation.
Turn on the main power switch of the
document camera. After the boot-up
screen, the presenter will perform an
automatic white balance or "Color
Adjustment."
Tip
: Make sure there is no subject matter
on the display surface to affect white bal-
ance. Printed text on white paper is OK.
The Aperture button will allow you to
switch between Text and Image settings.
"flip" your portrait documents for sharper
In the Text mode, adjust the Iris buttons
results and better display. Place the docu-
to set the desired brightness for text
ment on the surface in a landscape mode.
documents. In the Image mode, adjust the
Left-hand users place the top of the docu-
Iris to obtain the best results for image-
ment towards the left. Right-hand users
based materials such as photographs.
place the top towards the right. Press the
Tip
: Once you've adjusted your settings for
Rotate button once to flip the document
Text and Image, they are automatically
from left to right (for left-handed users) or
stored in memory, allowing you to quickly
three times (for right-handed users).
switch between a wide variety of materials
simply by pressing the Aperture button.
Quick Start Guide
O P E R A T I O N S
Press the AWC button to activate an
Press the Wide (Zoom Out) or Tele
(Zoom In) settings to reduce or enlarge the
image size. Auto focus will occur after
: Make sure there is no subject mat-
zooming has stopped.
Tip
: Make sure you're not moving the
subject during auto focus. If the subject is
blurry, press the AF button to re-focus.
Use the Rotate button to electronically
Pressing the AF button will activate an
auto focus adjustment at any time. Manual
focus is available on the remote or menu
via the mouse.
Tip
: Use the mouse and the built-in menu
command for extremely accurate manual
focus control...especially good for 3-dimen-
sional subjects when at maximum zoom.
www.samsung
To switch between input sources, such
as a computer, connect it to the Input 1 or 2
connections on the back of the Samsung
Digital Presenter. By pressing the
INT/EXT button, you can cycle
between the presenter and
any two sources.
Upper Lamps automatically turn on.
To change lighting options, press the LAMP
button to cycle through the sequence (Top
Lights / Light box / No Lights)
Tip
: It will take approximately 1-2
seconds after the Lamps Off setting
before the top lamps will light.
presenter
.com
The Iris buttons (brightness control)
are used to lighten (+) or darken (-) the
overall image for the desired result.
Advertisement
