Dante Transmitters
Devices that send or add audio into the network such as:
•
Receiver Outputs
•
Amplifier Outputs
•
Mixer Outputs
•
Signal Processor Outputs
•
Recorder Playback Outputs
Dante Receivers
Devices that receive audio from the network such as:
•
Amplifier Inputs
•
Mixer Inputs
•
Signal Processor Inputs
•
Recorder Inputs
Forming an Audio Route
Launch the Dante Controller and click on the intersection point between components to form an audio route. The audio route is
also referred to as a Subscription.
1.
Find the intersection between the transmitter and receiver channels.
2.
Click on the
where the components meet.
3.
A green checkmark
4.
Check the audio to verify that the audio route has been formed.
For additional information about the Dante controller, visit www.audinate.com.
indicates that the audio route has been established.
Shure Incorporated
44/63