Advertisement
Quick Links
Advertisement
Summary of Contents for Nebula BOOST
- Page 1 NEBULA BOOST Instruction Manual...
-
Page 2: Quick Start
The cycle should last a total of around two hours includ- ing cool down. While the Nebula Boost is in operation do not touch or open the device. 6. When the process has completed you will see the “-- --” on the front of the device. Carefully open the unit using heat proof gloves and open the silicone lid (do not touch with bare hands this could be very hot) Using gloves or tongs carefully take our your decarbed material. - Page 3 3. The Boost is for indoor use only and needs to be used at room temperature - not in a garage or a basement! Doing so can cause the unit to run outside of its normal cycle which may result in damage.
-
Page 4: Faqs / Troubleshooting
Re-run the cycle for this length of time. 6. What about CBD? In one cycle with the Boost, you can expect over 90% CBD decarboxylation! Research has shown that almost all bud contains some small percent of already activated CBD. We think that this, com-... - Page 5 10. Can I use alcohol in the device? No. Since alcohol alone is a strong enough solvent to almost instantly infuse, there’s no need for heat during the process. Most importantly, mixing heat and alcohol is dangerous and puts you at risk; Alcohol should never be heated in the Boost LCD Display Temp.
- Page 6 NEBULA BOOST Instruction Manual...