Spare Parts - cam IL MONDO DEL BAMBINO Quantico Instructions For Use Manual

quantico 6 dic 2017 15 lingue_Layout 1 06/12/17 15:52 Pagina 12
INSTRUCTIONS FOR USE
Caution: The points where the
seat belts pass are marked in red.
Do not pass the car seat belts in
any positions other than those
shown. Follow the indications
given in this
carefully.
5. Pass the seat belt through the
belt guide located under the
headrest.
6. Sit the child in the car seat.
7. Fasten the car seat belt.
Make sure the child is seated
correctly (see below).
8. Adjust the height of the
headrest so that your child's
head is well protected.
9. To adjust the child car seat to
the right height, pull the handle
located behind the headrest to
move it.
10. Check that the seat belt is
positioned in the green area
shown in the figure.
11. Check that the seat belt is
positioned correctly on your
child's body.
Check that the seat belt passes
through the
headrest and on the seat.
Check that your child is always
fastened securely and retained
properly by the car seat belt.
Check that the seat belt is always
properly adjusted in height and
length.
Check that the seat belt is not
twisted.
HOW TO REMOVE THE CAR
SEAT
12. Remove the belt from the
guides.
13. Pull the release buttons to
11
manual very
guides on the
release the ISOFIT connectors.
Remove the car seat.
CLEANING
Caution: The covers are an
integral part of the car seat: the
car seat cannot be used without
the covers. The covers can only
be replaced with original parts.
The cover can be hand washed in
lukewarm water (max. 30°C)
using mild soap. Do not spin, do
not iron and do not use solvents.
Follow the washing instructions
shown on the label of the cover.
Wash plastic parts with lukewarm
water and soap. Do not use
aggressive substances.

SPARE PARTS

1.Headrest cover
2.Seat cover
3.Backrest cover
4.EPS padding – headrest
5.EPS padding – backrest (right +
left)
6.Assembled ISOFIX base
7.Assembled headrest, including
the height regulation mechanism
8.Belt guide (right + left)
9.Shell
10.Backrest, assembled
11.Assembled Isofit system (right
+ left)
12.Handle for Isofit system
13.Instruction manual
14.Box/packaging