Download
Share
Print this page
Hifonics HFEQ-2 Operator's Manual
  1. Manuals
  2. Brands
  3. Hifonics Manuals
  4. Stereo Equalizer
  5. HFEQ-2
  6. Operator's manual

Hifonics HFEQ-2 Operator's Manual

Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
Operator's Guide
HFEQ-2

Advertisement

loading

Related Manuals for Hifonics HFEQ-2

Summary of Contents for Hifonics HFEQ-2

  • Page 1 Operator’s Guide HFEQ-2...
  • Page 2 Thank you for purchasing the HIFONICS HFEQ-2 4-Band Equalizer/ two-way crossover. This unit has both a pre-amp equalizer and crossover to provide the multi-speaker system of your vehicle with improved sound performance. Please read the entire manual to ensure proper connections and application.
  • Page 3 MOUNTING 1. Select the desired mounting location, either under the dash or in the dash. Make sure that there is adequate depth for the HFEQ-2. 2. Use the mounting brackets and hardware provided. Make sure there is proper clearance for the mounting bracket screws when attaching under the dash.

  • Page 4: Functions And Operations

    Functions & Operations Volume Control: The audio level (volume) can be increased or decreased with this illuminated VOLUME control knob. Subwoofer Control: The Subwoofer output level is controlled by the SUB illuminated knob. Fader Control: Allows to control the front and rear output levels. Input Selection: Allows to select input channel 1, 2 (AUX).
  • Page 5 Functions & Operations Input 1 (AUX): Channel 1 input from the source unit (radio/CD player) have L & R unbalanced inputs which are directly routed to the internal EQ and passed though to the Channel 1 outputs. Each input can be choosen independently by the input selector switch.

  • Page 6: Diagnostics And Troubleshooting

    4-Channel Source Unit Setup SUB OUTPUT AMPLIFIER 4 CHANNEL OUTPUT AMPLIFIER PHONE OR MP3 PLAYER SOURCE UNIT DC+12V IGNITION (REM) CHASSIS GND Diagnostics & Trouble Shooting The key to finding the problem in a troubled sound system is to isolate parts of that system in a logical fashion to track down the fault and correct the issue.
  • Page 7 Fuses chassis will cause the main fuse to blow. Blowing 3) If the HFEQ-2 is blowing fuses continually with only +12 volt, ground and remote leads connected, the unit may be faulty. 1) Check all fuses. 2) Check all connections.

  • Page 8: Specifications

    USA Inc. This warranty is limited to defective parts and specifically excludes any incidental or consequential damages connected therewith. To view the full warranty, please visit the website. Autotek products are designed and engineered in the USA by www.maxxsonics.com HF HFEQ-2 QSG 01 - rev1...