Advertisement
Brought to You by www.snapwhole.com
Brought to You by www.snapwhole.com
Specifications
Display Screen
Operating Temperature
Storage Temperature
Power
Overview
OBD II On-Board Diagnostics
It is required by the EPA that all 1996 and
newer vehicles sold in the United States be
equipped with an OBD II computer system.
OBD II is an early warning system
designed to monitor engine, transmission,
and emissions control components by
performing specific diagnostic tests.
When a fault condition is detected, the
system captures important data and
activates the "Check Engine" light.
Vehicle Coverage
This Scan Tool is designed to work with
all OBD II compliant vehicles, including
those equipped with a CAN bus.
OBD II was installed in some 1994 and
1995 model year gasoline vehicles.
Item 62142
Backlit LCD (128 x 64)
32°F to 140°F
-4°F to 158°F
8V to 18V power provided by vehicle battery
For technical questions, please call 1-888-866-5797.
If the light comes on, the vehicle might have
a condition that wastes fuel, shortens engine
life, or causes excessive air pollution. If
the problem that caused the light to come
on is addressed, for instance a loose gas
cap is tightened, the light will go out.
If the light comes on and stays on, a minor
engine fault condition is occurring and
should be addressed as soon as possible
If the light is blinking, a severe engine
fault condition is occurring and should
be addressed immediately.
The Scan Tool connects to the vehicle's
computer system and captures information
that can help identify the fault condition.
To verify if a 1994 or 1995 vehicle is
OBD II compliant, check the Vehicle
Emissions Control Information label, which
is located in the engine compartment.
Page 5
Hide quick links:
Advertisement
