Furuno FAR-2218 Operator's Manual page 6

No. Name
3 Information box
TT details example
AIS details example
4 TM
InstantAccess bar (Top Half)
A
B
C
D
E
F
4
TM
InstantAccess bar (Bottom Half)
A
B
C
D
E
F
5 TT/AIS operations
A B
6 CPA/TCPA box
A
7 Lost target filter
TT details display
Selected target's data is displayed on the
right-hand side of the screen.
The data displayed is as follows:
[BRG]: Bearing from own ship.
[RNG]: Range from own ship.
[T COG]: COG of target.
[T SOG]: SOG of target.
[CPA]: Closest Point of Approach of target
to own ship.
[TCPA]: Time to Closest Point of Ap-
proach of target to own ship.
[BCR]: Target's Bow Cross Range.
[BCT]: Target's Bow Cross Time.
Note: For C-types, you can display the
target's latitude/longitude instead of CPA,
TCPA, BCR and BCT.
Top half - Shared between all radar types
A: Pulselength button: Selects the pulselength.
B: Tune button: Toggles between automatic and manual tuning.
Note: For SSD antennas, this button appears as "TX CH x". ("x" denotes the channel used for transmis-
sion).
C: Interference Rejection button: Activates/deactivates the interference rejection feature.
D: Echo Stretch button: Activates/deactivates the echo stretch function.
E: Echo Average button: Activates/deactivates the echo average function.
F: ACE button: Activates/deactivates the ACE (Auto Clutter Elimination) function.
Bottom half - IMO-types
A: Radar Map button: Shows/hides the radar map marks.
B: Heading Line button: Temporarily hides the heading line.
G
C: CU/TM RESET button: Puts the ship's heading at the top of the screen in course-up mode the moment
this button is pressed; Resets the ship's position to a point of 75% radius opposite to the extension of the
H
heading line passing through the display center in true motion modes.
D: Own Ship AIS button: Shows the AIS VOYAGE DATA for AIS data setup.
I
E: AIS Message button: Displays received AIS messages; Opens the [AIS Message] menu.
F: Brilliance button: Adjusts the screen brilliance; Opens the [BRILLIANCE] menu.
J
Bottom half - C-types
K
G: Chart button: Shows/hides the chart.
H: Radar Map button: Shows/hides the radar map marks.
I: Heading Line button: Temporarily hides the heading line.
L
J: MOB button: Inserts an MOB mark at the current OS location.
K: Waypoint/Mark button: Selects the mark to be inserted.
M
L: AIS Message button: Displays received AIS messages; Opens the [AIS Message] menu.
M: Brilliance button: Adjusts the screen brilliance; Opens the [BRILLIANCE] menu.
A: Selects the TT mode, hides TT targets.
B: Selects the display priority for associated targets' data. Appears as "<" or ">".
C
C: Shows/hides AIS targets, or filters which targets to display.
D: Sets the vector time.
E: Sets the vector mode (reference).
E
D
A: Enable/disable CPA/TCPA alerts.
B: Set the CPA range.
B C
C: Set the TCPA time.
D: Enable/disable the automatic AIS activation function.
D
Shows/hides lost targets, or filters which lost targets are shown on the screen.
Description
AIS details display
Selected target's data is displayed on the right-hand side of the
screen.
The data displayed is as follows:
[MMSI]: Target's unique MMSI ID.
NAME]: Target vessel's name (call sign).
[NAV-STATUS]: Target's navigational status.
[BRG]: Bearing from own ship.
[RNG]: Range from own ship.
[COG]: COG of target.
[SOG]: SOG of target.
[CPA]: CPA of target to own ship.
[TCPA]: TCPA of target to own ship.
[BCR]: Target's BCR.
[BCT]: Target's BCT.
[POSN QUALITY]: Overall accuracy of positioning data.
[HDG]: Heading of target.
[ROT]: Target's rate of turn.
[STATUS]: Navigation status of target.
Note: The data displayed on-screen is dependent on equipment
configuration and AIS settings.
6