Features; Assembly - Breville the AirDynamic 3D Connect Instruction Book

F

Features

WHAT IS AN AIR CIRCULATOR?
Traditional fans will move air that is directly
in contact with them, pulling air from behind
to the front, with the benefit of cooling being
felt only when directly facing you. Usually
traditional fans are only used during the
warmer months.
Air circulators on the other hand, work to keep
all air in a room in motion, moving around
constantly and creating an air circulation
pattern that will make the whole room
more comfortable.
By using a 3D air circulation, your Breville air
circulator ensures constant movement of the
air in the room, reducing cold and warm spots
that are found in many rooms.
By circulating both stale indoor air and fresh
outdoor air (from open windows), Breville air
circulators also work on improving ventilation.
The Breville pedestal air circulator is perfect to
use all year round, as it regulates temperature,
clears stuffy air and creates a safe environment
for the whole family.
8
WHERE TO POSITION YOUR
AIR CIRCULATOR
WARMER MONTHS:
Cool air tends to sink to the floor. During
warm weather, point the air circulator
facing towards a wall on high speed, angled
halfway between the ceiling and floor. The
circulator will efficiently cool the room down
by forcing the cool air to move, creating air
circulation patterns.
When using an air conditioner, point the air
circulator from the back of the room towards
the bottom of the air conditioner at a 30° angle
to intensify the cool air and distribute the
cool air faster and more efficiently around the
room. Use the horizontal oscillation for even
better distribution.
COLD AIR
COOLER MONTHS:
Warm air naturally rises towards the ceiling.
When using a heater, the warm air produced
will move up. Point the air circulator fan up at
a 90° angle.
By pointing the air circulator upwards, the
hot air will circulate with the cooler air near
the floor, resulting in better distribution of
room temperature.
a

Assembly

BEFORE FIRST USE
Before using your Breville pedestal air
circulator for the first time, remove all
packaging material and promotional labels.
Check for any missing or damaged parts as per
the components list.
w
IMPORTANT:
When unpacking the air circulator, check
to see you have received all the items listed
in the components list, before discarding
the packaging.
ASSEMBLING THE PEDESTAL STAND
AND BASE
1. Align the connector on the bottom of
the pedestal tube with the connector on
the top of the anti-topple base and push
together (Fig 1).
Fig 1
2. Safely turn the assembled anti-topple
base on its side and securely tighten the
assembly using the hexagon screw and the
Allen key provided (Fig 2). Return the unit
back to an upright position.
Fig 2
ASSEMBLING THE AIR
CIRCULATOR HEAD
1. Remove the blade cap from the motor shaft
by turning clockwise. Remove the rear grille
locking nut by turning it counter-clockwise
(Fig 3).
Fig 3
2. Separate the front grille by turning the front
grille counter-clockwise (Fig 4). Remove
packaging and the fan blade and put aside.
Fig 4
9