Event Log
On this page there is a table of the events from the system's event log.
Item
Select an event
log category
Event Log
Clear Event
Log button
Sensor Monitoring Options
This page allows you to select sensor monitoring options. Sensors can be monitored external
baseboard management controller (BMC) connected to the PMB bus or you can directly monitor
sensors on the I2C bus.
Item
Monitoring
Options
External BMC
Slave Address
PMCP
monitoring file
(sp.bin)
Sensor
definitions file
(sdr.dat)
Upload new
file (if one
already exists)
Browse button
Save button
16 MegaRAC® M300V Card Implementer's Reference and User's Guide
Description
Select one of the following event categories:
•
Sensor-Specific Events
•
BIOS Generated Events
•
System Management Software Events
You can obtain the following information for each event:
•
Event ID
•
Time Stamp
•
Sensor Name
•
Sensor Type
•
Description
Left click the Event Log menu item to view and clear the event logs.
Description
You can select how you want to monitor the sensors.
Direct Monitoring of sensors on the I2C bus (needs PMCP files)
Monitoring via External BMC (needs IPMB connection)
If being monitored by an external BMC, you will need to provide the slave
address so that the MegaRAC® M300V card will be able to read data from
the onboard BMC on the motherboard/ server board. 0x20 is the address most
commonly used.
Select the Soft Processor (SP) File with the BIN file extension.
Select the SDR File with the BIN file extension.
Select this option if the SDR and Soft Processor (SP) File are already loaded
on the card and you want to have it replaced with the new file.
Use this button to look for the SDR and Soft Processor (SP) File.
Use this button to save your settings.