Table of Contents
Advertisement
11. Trouble shooting
Error code
8- - - - EE
EE8
EE
EE
8EEE
EEE
EEE
EEE8
8Er1
Er18
Er1
Er1
8Er2
Er2
Er2
Er28
8Er8
Er88
Er8
Er8
8Er9
Er98
Er9
Er9
Wrong
temperature
values
Parameter
configuration
not allowed
12. Technical Data
Auxiliary supply Us:
Rated supply voltage
Relay output:
Switching voltage
Switching current
Switching capacity
Edited (Date / Name): 16.07.09 Ba/Su
Page 14 von 20
ZIEHL industrie-elektronik GmbH + Co KG, Daimlerstr.13, D-74523 Schwäbisch Hall, Tel.: +49 791 504-0, Fax: -56, e-mail: info@ziehl.de
Cause
Under range
15
< R < 18,39
Over range
390,26
< R < 400
Sensor or line short circuit
LED error illuminates, LED of
the corresponding sensor
flashes
Sensor or line interruption
LED error illuminates, LED of
the corresponding sensor
flashes
Internal device error
Malfunction of the device
Invalid parameter
Sensors with 3-wire technique
interchanged
Code lock active
Remedy
check sensor and line resistance
compensation
check sensor and line resistance
compensation
check sensors/wires/terminals
check sensors/wires/terminals
Switch unit off and back on. If the error
continues to appear, the unit must be
returned to the factory for repair.
Press button "SET" for 10 s when
switching on supply voltage for factory
settings.
Check sensors with 3-wire technique.
Terminals of sensor 1...6 are not
compatible to terminals sensor 7...12
The Code-lock can be activated as a
protection against manipulation of the
settings. The user can change the PIN-
Code.
You have forgotten the PIN? -> Make a
code-reset:
press button "SET" for 2 s when
switching on supply voltage
⇒ display changes
8888
888
8888
888
– 8Cod
⇒ Release button „SET"
Code = OFF, PIN = 504
AC/DC 24-240 V, 0/45...65 Hz, < 5VA
DC: 20,4...297 V, AC: 20,4...264 V
1 Wechsler (CO)
max. AC 415 V
max. 5 A
max. 2000 VA (ohmic load)
max.120 W at DC 24 V
Cod8
Cod
Cod
– 8off
off8
off
off
– 8888
8888
888
888
Drawing No.: 12320-0702-01
Name: TR 1200
Advertisement
Table of Contents
