Control Panel - AEG L6WEJ841N User Manual

12 www.aeg.com
5.3 Installation on suspended
flooring
Suspended wooden floors are
particularly susceptible to vibration.
To limit vibration we recommend placing
a waterproof wooden panel, at least 15
mm thick, under the appliance. It should
be screwed to at least 2 floor beams and
should extend beyond the front feet.
If possible, install the appliance where
the floor is more stable.
5.4 Electrical connection
At the end of installation you can connect
the mains plug to the mains socket.
The rating plate and the 'Technical Data'
chapter indicate the necessary electrical
ratings. Make sure that they are
compatible with the mains power supply.
Check that your domestic electrical
installation can take the maximum load

6. CONTROL PANEL

6.1 Control panel description
Programme dial
1
Display
2
Delay Start touch button (Delay Start)
3
Drying time touch button (Time
4
Drying)
1
required, also taking into account any
other appliances in use.
Connect the appliance to an earthed
socket.
The power supply cable must be easily
accessible after installing the appliance.
For any electrical work required to install
this appliance, contact our Authorised
Service Centre.
The manufacturer does not accept any
responsibility for damage or injury
through failure to comply with the above
safety precaution.
9 8 7
Start/Pause touch button (Start/
5
Pause)
Drying level touch button (Dryness
6
Level) :
• Extra Dry option
• Cupboard Dry option
• Iron Dry option
2 3
4
5
6