Parrot ANAFI How To Maintain

How to maintain the battery

Hide thumbs Also See for ANAFI:

Download this manual

How to maintain the battery of the ANAFI?

Your ANAFI's smart LiPo battery is an essential element of your drone: it can power it for

a flight lasting 25 minutes. In this section, the PARROT.COM team provides some advice and

tips to maintain and maximize its lifespan.

What type of battery is fitted to ANAFI?

ANAFI is equipped with a Lithium Polymer (LiPo) battery. The latter needs to be handled and

stored in a particular way if you want to maximize its lifetime.

How to charge a new battery

A new battery, just out of the box, is charged to approximately 50 %. As with any high-

performance equipment, it is important to keep your battery in peak condition to optimize its

capacities. We therefore recommend that you systematically recharge the battery for about half

an hour after the end of your first few flights.

Page 1 How to maintain the battery of the ANAFI? Your ANAFI's smart LiPo battery is an essential element of your drone: it can power it for a flight lasting 25 minutes. In this section, the PARROT.COM team provides some advice and tips to maintain and maximize its lifespan.
Page 2 Wintering mode Ideally, when not in use for a prolonged period, batteries should be stored half-charged. When not in use for 10 days, Anafi’s smart battery discharges itself, if required, to 65% charge, over a 48h period. In other words, after a maximum of 12 days without use, this smart battery enters hibernation with a charge level which never exceeds 65%.
Page 3 The battery needs to be charged to exit the wintering mode and start operating as per usual, this behavior preserves the battery over time. Parrot recommends you always run a full charge of your smart battery before flying. What is the lifetime of a LiPo battery? A LiPo battery has a lifetime of about 300 charge cycles, but it all depends on how you maintain your battery.