Samsung AU8000 E-Manual page 104

Scanning for available channels on standby mode
Settings Broadcasting
Automatically scan for channels while your TV is in standby mode.
This function may not be supported depending on the model or geographical area.
The Auto Tuning Settings
Setting the Wake-up time
Settings Broadcasting
Schedule timer to turn the TV on and scan channels automatically.
This function may not be supported depending on the model or geographical area.
The Auto Tuning Settings
Setting the functions for the service provider
Settings Broadcasting
You can configure the service provider-related settings.
• Service Provider
Turns on or off the service provider function.
• About Service Provider
Displays the current service provider and its information detail.
• Open Service Provider Settings
You can set available service providers.
This function may not be supported depending on the model or geographical area.
Checking digital channel signal info and strength
Settings Support
If your TV is attached to a separate, over-the-air antenna, you can use the signal strength information to adjust the antenna
for increased signal strength and improved HD channel reception.
Signal Information is only available for digital channels.
This function may not be supported depending on the model or geographical area.
(Auto Tuning
may not appear depending on the model or geographical area.
(Auto Tuning
may not appear depending on the model or geographical area.
Service Provider Settings
Device Care
Settings) Standby Auto Tuning
Settings) Wake-up Timer
Self Diagnosis Signal Information
- 104 -
Try Now