Cub Cadet 59A30047150 Operator's Manual page 8

2-3 PTO Drive Assembly (Continued)
Attach the Idler Mount Assembly P#(A2067_03) to the Drive Assembly using (1) 3/8"-16 x 1" HHCS (A) P#(K1191), (1)
3/8"-16 x 1" Carriage Bolt (B) P#(K1182) and (2) 3/8"-16 Ny-Flange Lock Nuts P#(K2038). Refer to Figure 2-3b.
Leave Bolts Loose (Note: Orientation of bolts A & B).
Figure 2-3b
Idler Mount
Assembly
Next, secure the Idler Mount Assembly P#(A2067_03) to the Belt Guard Assembly P#(A2069_03) using (2) 3/8"-16 x
1" Carriage Bolts P#(K1182) and (2) 3/8"-16 Ny-Flange Lock Nuts P#(K2038).
Then, secure the Belt Guard Gusset P#(B1026) to the Belt Guard Assembly using (2) 3/8"-16 x 1" Carriage Bolts
P#(K1182) & (2) 3/8"-16 Ny-Flange Lock Nuts P#(K2038). Refer to Figure 2-3c & 2-3d.
Finally, tighten all bolts.
Figure 2-3c
8 8
3/8"-16 x 1" HHCS
3/8"-16 Ny-Flange Lock Nut
Idler Mount
Assembly
3/8"-16 Ny-Flange
Lock Nut
3/8"-16 x 1" Carriage Bolt
3/8"-16 x 1" Carriage Bolt
3/8"-16 Ny-Flange
Lock Nut
3/8"-16 x 1"
Carriage Bolt
Idler Mount
Assembly
3/8"-16 x 1" Carriage Bolt
A
Figure 2-3d
3/8"-16
Ny-Flange
Lock Nut
Belt
Guard
Assembly
Drive
Assembly
3/8"-16 Ny-Flange
Lock Nut
B
3/8"-16 x 1"
Carriage Bolt
Belt Guard
Assembly
Belt
Guard
3/8"-16 Ny-Flange
Gusset
Lock Nut