Page 1
Model 1683 Control Code Modem Installation & Operating Instructions...
Page 2
Note: Information furnished by AMERICAN DYNAMICS is believed to be accurate and reliable. However, no responsibility is assumed by AMERICAN DYNAMICS for its use; nor for any infringements of other rights of third parties which may result from its use. No license is granted by implications...
Page 3
I I I I N N N N S S S S T T T T A A A A L L L L L L L L A A A A T T T T I I I I O O O O N N N N A A A A N N N N D D D D S S S S E E E E R R R R V V V V I I I I C C C C E E E E If you require information during installation of this product or if service seems necessary, contact the American Dynamics Repair and Service Department at (800) 442-2225. You must obtain a Return Authorization Number and shipping instructions before returning any product for service.
Page 4
This product contains parts or assemblies. If you experience trouble with this product, please contact American Dynamics Service and Repair Dept. at (800) 442-2225. The telephone company may ask that you disconnect this equipment from the network until the problem has been corrected or until you are sure that the equipment is not malfunctioning.
Switcher / Controller* or a Code Distributor at pins CAUTION: This connection does not 10, 11 terminate the Control Code line. Add a terminating resistor if the modem is the last or only unit on the line. 'Note: systems, the Control Code line must...
START NUMBER Switches The setting of these two rotary switches on the modem at the distant site is irrelevant. RECEIVERS CONTROLLED Switch The setting of this rotary switch on the modem at the distant site is irrelevant. OPERATION Front Panel Indicators Four indicator lights on the front panels of each modem indicate status and operation.
Page 7
(1) Turn on both modems by depressing the "1" side of the power switches on the left of the front panels. (2) On the modem at the Switcher / Controller (XMIT mode), move the DATA / Talk switch to DATA. Its On-Line indicator will light.
Can be rack mounted. Dimensions: 1-7/8" x 10-3/8" x 8-1/8" (48 x 262 x 203mm) Weight: 3.3 lbs. Housing: Metal An American Dynamics Product Designed and built by Sensormatic CCTV Systems Division One Blue Hill Plaza Pearl River, New York, 10965...