Honda CBR1000F Manual page 184

Brake System
Rear Brake Pad Replacement
(1)
c
18 (1.8, 13)
I
• A contaminated brake disc or pad reduces stopping power. Discard contaminated pads and clean a contaminated
disc with a high quality brake degreasing agent.
• Check the brake system by applying the brake pedal after pad replacement.
NOTE
• The brake pad replacement can be serviced without disconnecting the hydraulic system.
• Clean the caliper inside especially around the caliper pistons before installing the brake pads.
• Always replace the brake pads in pairs to assure even disc pressure.
• Operate the brake pedal to seat the caliper piston against the pads after the pad replacement.
Procedure
O'ty Remarks
Removal Order
Installation is in the reverse order of removal.
( 1) Pad pin bolt
1 At removal, remove the pad pin while pushing
the
retainer.
(2) Brake pad
2
13-5