Chapter 11 BMCIFU
11.2 Replacing the BMCIFU
5.
Connect the power cords.
See
"3.20 Connecting Power
6.
From the Web GUI, configure chassis replacement in maintenance mode. If maintenance mode is
set, go to the next step.
See
"4.1.1 Setting Maintenance
7.
Confirm startup.
Start the node from the power button on the operation panel.
8.
Check the I/O configuration.
See
"4.6 Checking the I/O
9.
Turn off the power.
Stop all nodes by long-pressing the power button on the operation panel.
10. Clear maintenance mode.
See
"4.1.2 Clearing Maintenance
Cords."
Mode."
Configuration."
Mode."
72
C120-0090-04EN