TP-Link TL-MC1400 Installation Manual

Installation Guide
14-Slot Rackmount Chassis
Package Contents: Chassis, AC Power Cord, Fourteen Retainer-plates, Installation Guide
The pictures are for demonstration purposes only. The actual product may differ in appearance from the depicted.
Installation
Step 1: Install the Media Converters in the Chassis
Note:
It is recommended to use TP-Link media converters. Other vendors' products may
be incompatible.
1. Tweak out the two screws on the media converter. Then install the
retainer-plate (provided with the chassis) to the media converter using
the screws removed from the media converter.
2. Remove the front metal plate of the slot on the chassis, then carefully
slide the media converter into the slot and lock it tightly with the
locking knob.
Step 2: (Optional) Install the Redundant Power Supply Module
Remove the protective cover on the power supply module slot of the chassis.
Then gently push in the module and plug it solidly into the connector.
Chassis
To ask questions, find answers, and communicate with TP-Link users or
engineers, please visit https://community.tp-link.com to join TP-Link
Community.
For technical support and other information, please visit
https://www.tp-link.com/support, or simply scan the QR code.
If you have any suggestions or needs on the product guides, welcome
to email techwriter@tp-link.com.cn.
© 2020 TP-Link 7106509020 REV3.2.1
Step 3: Mount the Chassis on the Rack
Note:
1. The chassis supports EIA standard-sized, 19-inch racks.
2. For security reasons, it is recommended to install the chassis as shown below.
Fasten the chassis to the rack with screws through the holes of the
brackets on each side.
Step 4: Power On
1. Electrically connect the Grounding Terminal on the rear panel of the
chassis to ground via the ground cable.
Grounding Terminal
2. Connect the chassis to the AC outlet using the provided power cord.