Safety; General Safety; Safety And Instructional Decals - Toro MB TX 2500S Operator's Manual

Safety

General Safety

•
Read and understand the contents of this
Operator's Manual before starting the engine.
•
Do not operate the machine without all guards
and other safety protective devices in place and
functioning properly on the machine.
•
Park the machine on a level surface, lower the
hopper, shut off the engine, and remove the key
before leaving the operating position.
•
Keep your hands and feet away from moving
parts. If possible, do not make adjustments with
the engine running.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
1. Crushing hazard of hands or feet—install the cylinder lock.
1. Read the Operator's
Manual.
115-4858
116-8775
2. Warning—fill to the bottom
of the filler neck; do not
overfill the tank.
Improperly using or maintaining the machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always pay
attention to the safety-alert symbol
means Caution, Warning, or Danger—personal
safety instruction. Failure to comply with the
instruction may result in personal injury or death.
decal115-4858
decal116-8775
1. Lift point
4
(Figure 2), which
125-4967
decal125-4967