Table of Contents
Advertisement
B-12
General Description
This feature provides a HOT LINE - OUTSIDE [H-9] function for a D
Operating Procedure
To access a BROKERAGE HOT LINE - OUTSIDE from a D
1.
Lift the handset or press the SPEAKER key.
2.
Press the sub-line key associated with a predetermined desired outside party. The destination station is
automatically dialed; ringback tone is heard; the destination station answers.
3.
After completion of the conversation, hang up or press the SPEAKER key.
To immediately make another BROKERAGE HOT LINE - OUTSIDE call
1.
Press another sub-line button associated with another station without going on/off-hook. The RELEASE
key on the Add-On Module can be used as the RELEASE key.
2.
A maximum of 39 BROKERAGE HOTLINES-OUTSIDE can be used to access distant destinations.
Service Conditions
1.
One of the line keys of the D
2.
When a BROKERAGE HOT LINE - OUTSIDE call is made, the D
number but does not show a SERVICE DISPLAY [S-25] for the BROKERAGE HOT LINE.
3.
The My Line of a D
4.
The virtual line of a single line station can be assigned as the hot line station.
5.
BROKERAGE HOT LINE - OUTSIDE uses SPEED CALLING - SYSTEM [S-3] memory. The total
number of BROKERAGE HOT LINE - OUTSIDE destinations is limited by the capacity of the SPEED
CALLING - SYSTEM [S-3].
6.
ATTENDANT CAMP-ON [A-1], CALL BACK [C-1], CALL WAITING [C-31], and EXECUTIVE
RIGHT-OF-WAY [E-1] can be prohibited to the BROKERAGE HOT LINE - OUTSIDE connection
through CLASS OF SERVICE - INDIVIDUAL [C-15].
7.
A hot line station user confronted with all trunks busy or all senders busy at the time of calling hears the
reorder tone. No indication is shown on the user's D
8.
Outside connection when a user calls in BROKERAGE HOT LINE - OUTSIDE service is realized when
trunk classification (DDD, TIE, CCSA) and the trunk number is indicated on the LCD indication.
9.
Outside connection when a user answers in BROKERAGE HOT LINE - OUTSIDE service is realized
when time duration, trunk classification (DDD, TIE, CCSA) and the trunk number is indicated on the LCD
indication.
10.
The Station Message Detail Recording (SMDR) is available for outgoing calls in the BROKERAGE HOT
LINE - OUTSIDE service.
term
11.
A D
with an Add-On Module attached is used for applications requiring at least 15 but fewer than 39
destinations. In this case, one of the line keys of the D
12.
An AC Adapter is required for the Add-On Module for the D
13.
This feature can be activated via FCCS.
14.
Only the station assigned a telephone number is available for the station assignment when activating this
feature via FCCS.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Brokerage Hotline - Outside
Brokerage Hotline - Outside
term
must be assigned as the My Line.
term
cannot be assigned as a BROKERAGE HOT LINE - OUTSIDE.
term
.
term
term
display shows the connected trunk
term
LCD.
term
must be assigned as the My Line.
term
phones.
B-12
Page 97
Advertisement
Table of Contents
