Communica CST-VG503 User Manual

VGA + Audio Extender User Manual
With this product you can extend the VGA and audio signal from 0 to 300 meters
with only one CAT5E/6 cable. Widely used in the office, education, entertainment
military, information and other platform. It will save your time, money, device,
energy. Improve your efficiency, a good assistant of your work.
1.Product Features
1) Beautiful outlook, easy installation
2) Plug and play
3) Support DOS， WIN3.X, WIN95/98/98SE/2K/ME/XP/NT, Apple， MAC Linux, Netware, Unix
operation systems and so on
4) Interface type: HDB15-F, RJ45, Audio DC3.5
5) Support video format: VGA, SVGA, XGA, UXGA
6) Support Video resolution up to: 1920X1440@60Hz
7) Support several signal source: Computer, Laptop, Digital Video Recorder(DVR)
8) Video(VGA) and Audio extension simultaneously
9) Extension distance: 0 to 300 meters
10) Power adapter: DC5V@1000mA
2. Installation Steps
1) Connect the Sender and signal source with one VGA(M-M) cable, and one DC3.5 audio cable
2) Connect the local VGA & Audio output in the Sender to the Monitor and earphone (Optional)
3) Connect the Receiver to the monitor and earphone
4) Connect the Sender and the Receiver with one CAT5E/6 cable
5) Power on the Sender and Receiver
6) Adjust with the screw driver in the Receiver to reach the best display effect (Optional)
3. Packing List
1) One Sender, one Receiver
2) Two DC5V@1000mA power adapters
3) One user manual, Warranty card, certification card
4) Display effect adjusting screw driver (Optional)
4. FAQs
1) Nothing displayed on the monitor
Answer: A: Check the power adapter, whether the Sender and Receiver powered on normally or
not
B: Check all the connectors connection fit or not
C: Check the VGA cable and CAT cable quality
2) The monitor displayed vague, slur, unclear, color cast
Answer: A: Check all the connectors connection status
CST-VG503