Table of Contents
Advertisement
Problem solving guide
Display warnings
Message
The symbol lights up
in the display. You can-
not switch the appli-
ance off.
Two bars are flashing in
the display.
The alarm tone is
sounding and the
symbol and the tem-
perature display are
flashing.
40
Cause and remedy
The safety lock has been activated.
Completely deactivate the safety lock (see "Select-
ing further settings – Activating and deactivating
the safety lock").
A temperature will not be shown in the display until
the temperature in the appliance drops below 0 °C.
Check the temperature in the display about 6
hours after switching the appliance on.
The temperature alarm has been activated (see
"Temperature and door alarm"). The temperature in
the refrigeration appliance is too warm or too cold.
Possible reasons for this include:
– The appliance door has been opened too fre-
quently.
– A large quantity of fresh food has been placed
in the freezer without switching on the Super-
Freeze function.
– A prolonged power cut (mains outage) has oc-
curred.
Rectify the cause of the alarm. will go out.
Depending on the temperature displayed, you
should check whether food in the freezer has star-
ted to thaw or has defrosted. If it has, it should be
used as soon as possible. Defrosted food may
only be re-frozen after it has been cooked.
Advertisement
Table of Contents
