Two-Button On Setting; Show Marks - Alphasmart NEO User Manual

Control Panel

Show Marks

Show Marks is a setting that shows right arrows when you use tabs
and return arrows when you use carriage returns.
The right arrows and return arrows don't transfer to your computer,
but the tabs and returns do.
The Show Marks setting in Control Panel is a toggle; you select it and
press
enter
You can also set Show Marks from within AlphaWord Plus.
To enable or disable Show Marks within AlphaWord Plus:
1. Press
2. Press

Two-button On setting

The Two-button On setting lets you control whether you turn your
Neo on with one key press or two. Neo's default behavior is to turn
on when you press
a backpack or briefcase, you might want to change this behavior so
that you don't inadvertently turn the device on in transport and drain
power from it.
When you enable this option, you must press and hold down
then press
68
Tab
to turn it on and repeat those steps to turn it back off.
.
option- -K
, then press
3 esc
. But if you frequently transport your Neo in
on/off
to turn your Neo on. Use Control Panel or
on/off
Carriage return
to exit the screen and return to your file.
,
enter
Neo User's Guide