Unpack Your Printer; Connect The Power Cord - Pitney Bowes PB-SP100 Installation Instruction

1. Unpack your printer.

Below is the contents you will find in the box.
If you have any problems during this installation, refer to the
'Troubleshoot' section at the end of this guide.
Printer
USB

2. Connect the power cord.

Connect the power cord and adapter to your printer
(as shown) and switch on.
3. Printer ready.
Wait for about 10 seconds until the 2 green lights
remain constant and the printer is ready.
Power Cord
Network Cable
(not used for USB installation)
10