Usb-C Led; Mode Button - Cisco Catalyst Micro Series Hardware Installation Manual

Product Overview
Color
Amber

USB-C LED

Color
Off
Green

Mode Button

The mode button is used for resetting the switch, selecting or changing an LED mode, and manually waking
up the switch from hibernation mode.
In Cisco Catalyst Micro Series Switches, LEDs are normally turned off to save power. When the mode button
is pressed, the LEDs turn on for a set period of 60 seconds before they turn off again to save power. This can
be overridden by a configuration parameter which alters the default 60 second timeout or disables LED power
savings completely. All LEDs are affected by this function except the System LED, which only dims and
does not turn off completely.
System State
LEDs Off
LEDs On
Bootloader Active
Switch in Deep Sleep
System Status
System is receiving power but is not operating properly.
Description
USB PD power is not sourced or no USB device is connected.
USB device is connected and power sourcing is initiated.
Duration
Any
Any
Hold until bootloader completes
Hold for more than 1 second
Cisco Catalyst Micro Series Switch Hardware Installation Guide
USB-C LED
Action
Activates the LEDs for 60 seconds,
then returns the LEDs to Off State.
System LED dims but does not turn
off.
Toggle between "Stat" and "Speed"
LED modes. These modes only
affect the port data LEDs.
Stops autoboot and remains at
bootloader prompt.
Switch wakes up to full power
mode.
7