Summary of Contents for Nassar PS-100
- Page 1 SINCE 1973 User Manual 7 DAY PROGRAMMABLE DIGITAL TIMER MODEL PS-100 The best solutions for automation and protection www.nassarelectronics.com...
- Page 2 Ÿ stored in the permanent memory. It also includes a LED indicator that turns on when the output contact is closed. The PS-100 is dual voltage, it can be used with either 120 or 220V. Wiring Connection with Voltage Output The PS-100 digital timer can be connected to a supply voltage of 120 to 220 VAC at terminals TC and T1.
- Page 3 PS-100 DIGITAL TIMER MANUAL Setting the clock Quick time change To set the time press the “Prog” button, then press the The clock can be set forward or set back an hour with “Enter” button to enter to the clock setup menu.
- Page 4 PS-100 DIGITAL TIMER MANUAL Programming the schedule To set the event operation use the up and down arrow To program the schedule press twice the “Prog” buttons, “ON” to turn on the equipment by closing the button, then press “Enter” to enter the schedule output contact, “OFF”...
-
Page 5: Panel Mounting
PS-100 DIGITAL TIMER MANUAL Mounting options & Dimensions This unit can be mounted on a standard 35 mm DIN rail or screwed into a surface using the screws included in the package. Enclousure Dimensions: 5.7 x 4.1 x 2.4 in... -
Page 6: Specifications
These products are warranted to be free from defects in workmanship or material under normal service and use for a period of three (3) years from date of manufacture. Nassar Electronics shall, at its option, repair or replace F.O.B. point of manufacture the portion of the product found by Nassar Electronics to be defective.