Page 1
1. Connect the 1-sided end (USB plug) of the EHS adapter to the USB socket of your desk phone. 2. Connect the split end of the EHS adapter to the Jabra PRO 9400 base as follows. Insert the RJ9 plug into the socket marked with a "phone"...
Page 2
21/05/2021 23:47 Select phone settings, "Desk phone", then "Connect to a desk phone?", "Manual". Select Adapter Type "DHSG" Base setup: Set the phone setup switch to position "A". Microphone volume setup: https://www.jabra.in/supportpages/jabra-link-14201-32/14201-32/faq/942e0c4c-dee6- Page 2 of 3 4bef-bfd0-57ea86fc5673...
Page 3
We recommend setting the microphone volume to 7 out of 13. Guided set-up: As part of the installation you can dial into the local Jabra Setup Server that takes care of configuring audio path. Please follow the instructions shown on the display. In the event your Jabra Setup Server is unavailable, please contact your local Jabra Support team.
This manual is also suitable for:
Go 6400Nortel ip 1120eNortel ip 1140eNortel ip 1150eNortel ip 1165e