Belkin F1DN-MOD-VMOUNT Quick Installation Manual

Quick Installation Guide
Belkin Secure Modular KVM/KM Switch VESA Mounting Bracket Guide
The Belkin Secure Modular KVM/KM Switch VESA Mounting Bracket is designed for quick deployment and attaches to the KVM/KM via tension to two 90 degree
brackets. There are no screws required to fasten the KVM/KM to the bracket. The unit can be secured to a VESA 100mm x 100mm mounting location using the included
cable ties around each or several host and console cables. In addition, each cable that attaches to the KVM/KM comes with Velcro tie wraps that can be used to secure
the unit to the mount and signify the enclave connected by color. See illustrations for full details.
Included Contents:
• VESA Mounting Bracket
• Screw - M4x14mm PH Phillips DW SEMS SS Qty 6
• Cable Tie - 3.2x140mm Nylon Black Qty 8
• 1 QIG (Quick Installation Guide)
Pre-Installation Guidelines
• Determine where you will be mounting the bracket and the orientation of the bracket to the back of the user monitor (see below). NOTE- should the monitor to
be used does not have an exposed 100mm x 100mm VESA pattern and nut inserts, the F1DN-MOD-VMOUNT will require a 3rd party adapter and monitor stand.
Contact your system administrator for details on how to achieve the adapter and stand. If the monitor does have an exposed 100mm x 100mm VESA pattern,
continue on with the installation instructions.
• Ensure the bracket will be installed on a flat, clean, and dry surface on the monitor. This bracket is not intended for exposed outdoor installation.
• Ensure that maximum distance between the KVM/KM bracket and each computer does not exceed your cabling lengths.
• Ensure that the keyboard, mouse, and display cables will reach the mounted KVM/KM.
• Ensure that the KVM/KM included remote control buttons are easily visible and accessible by the intended user.
• Ensure that the included screws are adequate size and type for the designated installation. In some cases with an adapter and stand, 3rd party hardware may be
required.
© 2020 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers
F1DN-MOD-VMOUNT
Belkin Modular KVM/KM VESA Mount
For models: F1DN102-BA-4, F1DN202MOD-BA-4, F1DN104MOD-BA-4, F1DN204MOD-BA-4, F1DN002KM-4, and
F1DN004KM-4
F1DN-MOD-VMOUNT 8820-03129 Rev.A00