Table of Contents
Advertisement
Let's get familiar with the two control keys.
First we want to get the System mode selected and menu displayed. If the System menu
is displayed, continue with the next paragraph. If it is not displayed, press I
System
I.
If it
is still not displayed, press I
Menu
I.
With the System menu displayed, press unshifted-I
Menu
1
several times. The system menu
display should go on and off. Leave the System menu displayed, and continue.
N ow press I
Shift
H
User
I.
The User 1 menu should appear on your display.
Press I
Shift
H
Menu
1
several times. The displayed menus should rotate successively through
the three User menus (User 1
~
User 2
~
User 3
~
User 1
~
User 2, etc.).
Press unshifted-I
Menu
1
several times and the last User menu goes on and off. Leave the
User menu on.
Finish this exercise by pressing unshifted-I
System
1
to get your computer back in System
mode.
System Softkeys
The following paragraphs define the eight System softkeys.
Step
Continue
RUN
Step
(unshifted-lliJ) allows you to execute one program line at a
time. This is particularly useful for debugging (fixing) programs.
Continue
(unshifted-@]) resumes program execution from the point
where it was paused (by an unshifted-[]!QEJ).
RUN
(unshifted-@]) starts a ,program running from the beginning.
ITF Keyboards
7-13
Advertisement
Table of Contents
