Specifications and Cleaning ………………………… Indications and intended use Indications and Intended Use ……………….…………... The Portable Angle Monitor (PAM 2) is an assist device that provides feedback on ankle joint range of movement Theory of Operation …………………………………….… by sending data wirelessly to the Portable Limb Load Warranty ………………………………………………….
If you have finished the session and the Low Battery LED is lit, then recharge your device before the next use. If for any reason you need to replace your battery, contact nCounters, so as we can provide you with the correct battery for the charger circuit.
To get the best results from your PAM 2, place the sensor over the forefoot of the user’s shoe / runner. Choose the appropriate size nCounters’ elastic strap with Velcro, so it passes under the PAM 2 enclosure securing it in position as shown in Figure 3.
PLLM MODE OF OPERATIONS SCREENS WHEN USING THE PORTABLE ANGLE MONITOR (PAM2) WELCOME SCREEN PAM is on - turn on PLLM Control Unit. Welcome screen displayed if there is communication between PAM 2 unit and PLLM Control Unit CHOICE SCREEN Choose radio button X Angle for feedback then press OK.
Extend the foot to the desired angle for feedback. Press START – angle is captured and recorded on Control Unit screen as Target Level (Target Lvl). Figure 7 Figure 6 Ankle extended beyond start angle so will get feedback. Ankle joint at angle for desired extension for feedback - press START. Portable Angle Monitor Instruction Manual.March .2021...