John Lewis 76651602 Quick Start Manual

Crystal Parcel Set - Stock Number 766 51602
Thank you for purchasing these Crystal Parcel Lights. Please read the instructions and warnings carefully before use to ensure
safe and satisfactory operation of this product.
Please note

FOR INDOOR AND TEMPORARY OUTDOOR USE (During Festive seasons, parties etc.)

Transformer for indoor use only.

These lights use LEDs that are not replaceable.

The light set operates via a 230-240V 50Hz safety isolating transformer.
Instruction for use
1. Carefully remove the product from the packaging.
2. The transformer should not be covered or enclosed in any way as it will become warm during normal operation.
3. The cable must be fully extended prior to use and there should be no twists or snags. Position the cable so it does not
pose a trip hazard.
4. 8 different functions and timer can be selected via the easytimer™ transformer.
easytimer™ Operation
Warnings

Warning! Do not connect this light set to the supply while it is in the packaging.

Do not electrically connect this set to any other set by cutting or joining sets together.

Do not use if the insulation of the light set becomes damaged. If the cable or cord becomes damaged, the light set
must be destroyed.

Disconnect the transformer from the mains when the light set is not in use.

The transformer and light set must be kept indoors.

The transformer will become warm in use so do not place it on or near surfaces which could be affected by heat
such as table tops or carpets.

Only use the transformer supplied.

Do not allow children to play with or near the light set in case they break the bulbs. Young children should not be
left unsupervised near a Christmas tree or illuminated decoration.
John Lewis Partnership 171 Victoria Street London SW1E 5NN
www.johnlewis.com

Select one of the 8 functions by pressing the controller
button.

At the time you want your light set to switch "ON", press
the button for 3 seconds or until the button illuminates
green. The set will stay lit for the same 8 hours every day
until reset.

To reset, simply press the button for 3 seconds or until the
green lights goes off. The timer is now in the "OFF" mode.