This page allows the selection of the direct signal going either Pre-EQ,
Post-EQ (both with no panning or tremolo), or Post-EQ with Panning or
Post-EQ with Tremolo.
3) Pressing the "Up"
Tremolo Depth page which will read:
.........depending on if Panning or Tremolo was selected above.
Pressing the
VALUE
Tremolo Depth. The range is 0 to 99.
4)
Pressing the "Up"
Tremolo Speed page which will read:
.........depending on if Panning or Tremolo was selected above.
Pressing the
VALUE
Tremolo Speed. The range is 0 to 99.
MODULATING THE PANNING OR TREMOLO
PARAMETERS
The Auto Panning Speed and Depth and the Tremolo Modulation Speed and
Depth can also be modulated by any MIDI modulation source. This can be
button repeatedly will select the Panning Depth or
PAGE
EQ PANNING DEPTH
99
or
EQ TREMOLO
DEPTH
buttons will select the desired amount of Panning or
button again will select the Panning Speed or
PAGE
EQ PANNING SPEED
30
or
EQ TREMOLO SPEED
30
buttons will select the desired amount of Panning or
18
18
99