Viking C-3000 Product Manual
  1. Manuals
  2. Brands
  3. Viking Manuals
  4. Safety Equipment
  5. C-3000
  6. Product manual

Viking C-3000 Product Manual

Apartment entry system
Hide thumbs Also See for C-3000:
Table of Contents

Advertisement

Quick Links

Download this manual
DESIGNED, MANUFACTURED AND SUPPORTED IN THE USA
VIKING
SECURITY & COMMUNICATION
Add Apartment Entry Without Rewiring
This entry system is designed to utilize a building's
existing telephone wiring and to address a variety
of apartment entry applications. Viking's C-3000
Entry System provides secure multi-tenant building
access, without the need for any C.O. lines; the
only requirement is that each tenant have a touch-
tone telephone set wired to their apartment. The
C-3000 performs equally as well in installations
where C.O. lines are present. An individual C-3000
module has a 12-tenant capacity; for larger appli-
cations, a maximum of eight (8) C-3000 modules
can be interconnected, allowing a total system ca-
pacity of up to 96 tenants. A C-3000 system con-
sists of at least one Primary C-3000 module, and
as many as seven Secondary modules.
From either of two entry doors, visitors may ring a
tenant's telephone with a distinctive cadence, alert-
ing the tenant of their arrival. The C-3000 provides
call waiting tones if the tenant's line is in use. The
tenant may then converse freely with the visitor via
their existing telephones. Once identified, the ten-
Features
• Utilizes building's existing telephone wiring, yet
functions with or without tenant CO lines
• No monthly charges for a dedicated line
• Tenants do not require phone service
• Programmable keyless entry code for each
tenant
• Distinctive ring cadence and call waiting
• Programmable from dedicated programming
phone
• Supports (2) entry doors and (2) door strikes
• 12-tenant capacity may be expanded to 96
tenants at any time
• Compatible with Viking's vandal resistant
K-1700-3, K-1900-8 or any Touch Tone phone
• May be wired so that tenants may talk to
visitors without disrupting C.O. modem
transmissions
• Allows visitors to leave voice messages on
tenants personal answering machines
www.VikingElectronics.com
Information: (715) 386-8861
PRODUCT
MANUAL
ant can let the visitor in by entering a single touch-
tone on the keypad of the tenant's telephone set.
The C-3000 keyless entry feature supports unique
entry codes for each tenant. As a measure of se-
curity, the codes can be easily changed as tenants
move in and out of the building. A postal lock fea-
ture is also supplied as an added convenience.
• Apartments and condominiums
• Buildings where some or all tenants lack phone
service
• Supervised living
• Student housing
• Retrofit older construction
Power: 120VAC / 13.8VAC 1.25A, UL listed
adapter provided
Dimensions: 211mm x 160mm x 46mm (8.30" x
6.30" x 1.80")
Shipping weight: 1.0kg (2.2 lbs.)
Environmental: 0° C to 32° C (32° F to 90° F) with
5% to 95% non-condensing humidity
Talk battery: 40VDC
Relay contact ratings: 5A @ 30VDC / 250VAC
Maximum System Door Phones/Door Strikes:
(2) each
Maximum System Tenant Capacity: 96 - using
(8) C-3000 modules
Ring Generator:
maximum
Connections: (1) RJ-21X female 25-pair, (3) RJ-
11 female, (13) terminal block positions
C-3000
Apartment
Entry System
July 8, 2020
Applications
Specifications
90V AC nominal, 7 REN

Advertisement

Table of Contents
loading

Related Manuals for Viking C-3000

Summary of Contents for Viking C-3000

  • Page 1 (8) C-3000 modules can be interconnected, allowing a total system ca- pacity of up to 96 tenants. A C-3000 system con- sists of at least one Primary C-3000 module, and as many as seven Secondary modules.

  • Page 2: Preparing The Installation

    (if applicable). If the tenant phone wiring is not currently cabled though a "66" block or blocks, it will be necessary to install "66" block(s) at this time to facilitate the installation of the C-3000 system.

  • Page 3: Standard Wiring

    Note: If the Primary C-3000 is powered up first, it is normal for the E. Standard Wiring power LED’s of all C-3000’s to light. Bridged Bridged Module ID #1 “Primary” for Apts 1-12 Row 1 Row 2 Row 3 Row 4 VIKING C.O.

  • Page 4: Detailed Example

    In this scheme, the modem will be connected to the Y/BK pair of the RJ-14 which is wired ahead of the C-3000, directly to the C.O. line. Use a 2 line splitter to connect the modem to the Y/BK pair.
  • Page 5 #00. There is no factory default setting for this value, nor is there a requirement that it be set. Relay Activation Time: The period of time (in seconds) for which a C-3000 door strike relay will remain activated, after having been given an activation code.

  • Page 6: Operation

    D. General C-3000 System Setup The following procedures are to be performed on each module in the C-3000 system, one module at a time. Note that while each module needs to be programmed separately, it is standard practice to make all of the following settings identical, for all modules.

  • Page 7: Keyless Entry

    The primary C-3000 has not been properly programmed with the "number of modules" in the stack (##8 memory lo- cation). The primary C-3000 must be told how many C-3000's are in the stack and this is set to one by default. Pro- gram the primary with the correct number of units in the stack.

  • Page 8: Warranty

    Product Support: (715) 386-8666 Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes.

Table of Contents